Cilindri inox a norma ISO 15552

Extract from catalogue - stainless steel cylinders standard ISO 15552 (4Mb)

Drawings DXF
Drawings DWG

3D drawings in STP format - documents freely available with registration

XF
Stainless steel AISI 304/316 covers, barrel, piston rod and tie rods
FP Stainless steel AISI 304/316 barrel, piston rod and tie rods; acetal resin covers

FA Stainless steel AISI 304/316 barrel, piston rod and tie rods; anodized aluminium covers

ISO 15552 standard cylinders range for harsh work environment has made of 3 series from 32 to 125 mm bore; "XF" series completely made of AISI 304 or 316 stainless steel, "FP" series with acetalic resin end caps and other components made of AISI 304 or 316 stainless steel, "FA" series with anodized aluminium end caps and other components made of AISI 304 or 316 stainless steel.
XF series fits the chemical, food and pharmaceutical environment; FP and FA series fits in ligth work environment in which are requested a periodical cleaning of the working zone.
Particular attention has to be taken on the choice of series; infact FP. series has to be used with lights load due to the use of such materials for end caps indeed FA has to be used on very easy work environment due to the low chemical resistance of the anodized aluminium.
Available in many basic versions and variations, especially in the sealing field that together with a complete range of fixing accessories and specific magnetic sensors allow the best use to the customer.

Order codes
X F 4 M . 0 3 2 . 0 2 5 0 . V S . K K
1 2 3 4 5 6 7
1 Series
XF Stainless steel AISI 304 / 316 covers, barrel, piston rod and tie rods
FP Stainless steel AISI 304 / 316 barrel, piston rod and tie rods - acetal resin covers
FA Stainless steel AISI 304 / 316 barrel, piston rod and tie rods - anodized aluminium covers
2 Typology
4 AISI 304
6 AISI 316
3 Version
M Magnetic
S Non magnetic
4 Bore
Ø 32·40·50·75·80·100·125 mm
5 Standard stroke
25-40-50-75-80-100-125-150-160-200-250-320-400-500-600-700-800-900-1000 mm
6 Variants - Standard front and rear pneumatic cushioning
SP Version: through rod
SS Piston rod and rod nut: no thread undercut
A6 Piston rod and rod nut: AISI 316 (XF4, FP4, FA4)
VS Piston rod seal: fluorine rubber (max temperature: 150°C)
ES Piston rod seal: EPDM
PS Piston rod seal: polyurethane
GV All seals: fluorine rubber (max temperature: 150°C)
GE All seals: EPDM
GP All seals: polyurethane seals
AA Pneumatic cushioning: front only
AP Pneumatic cushioning: rear only
NA Pneumatic cushioning: not present
7 Special versions
AM.. Screw tap rod end with lenght on request
WH.. Rod protrusion on request
SF Female screw thread rod end
SD Rod end according to the customer's drawings
KK Metrical thread
C ...
Cylinders opposed by 3-positions (same stroke) or 4 positions covers (different stroke)
TD ...
Thrust and draught tandem - This cylinder develops a force of multiple (n) ompared to the standard
... MS
Multiple position cylinder - This "n"-stages cylinder has n+1 positions
RCU ..
Outlet stroke adjustment - It allows to adjust precisely the point of rod max extension
RCR ..
Inlet stroke adjustment - It allows to adjust precisely the point of inlet limit stop of rod
SEA Single acting cylinder front spring, inlet rod at rest - Bore 32÷100, max stroke 50 mm

 

Code example
ISO 15552 cylinder, end caps, tube, piston rod screws and tie rods AISI 316 stainless steel. Bore 63 mm, stroke 250 mm, piston rod seal fluorine rubber.
XF6M.063.0250.VS

 

Magnetic switches


Extract from catalogue - magnetic switches (5.8Mb)